Line6 - Stagesource L3m

Line 6

LINEST801A

Nouveau

Disponible chez notre fournisseur Cet article ne se trouve pas actuellement en stock dans notre magasin, mais peut-être commandé auprès de notre fournisseur. Si vous souhaitez connaitre les délais d'approvisionnement, n'hésitez pas à prendre contact avec nous.

1 160,00 €

Réglez de manière sûre et sécurisée par Ingenico ou virement bancaire
Réglez de manière sûre et sécurisée par Ingenico ou virement bancaire

Line6,Stagesource L3m

Line 6

 

Smart Speaker Modes

StageSource® is designed to be the world's most versatile loudspeaker system for musicians. Using six powerful DSP-based Smart Speaker modes, the StageSource L3m output is optimized for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. Onboard accelerometer and pole mount sensors automatically detect the speaker's orientation and set the Smart Speaker mode accordingly.

 

Powerful 1,400-watt, Three-way Design

The 1,400-watt, 3-way, tri-amped speaker system and a dual-braced tour-grade plywood enclosure combine to deliver astounding power and reliability. The innovative multi-function design enables the L3m to be the perfect loudspeaker in a wide variety of applications including floor or stage-stacked, pole-mounted, horizontal as a floor monitor, Virtual Tilt-back for instrument backline or flown with the integrated M10 suspension points for installation.

 

Fast Networking via L6 LINK

In live sound situations where two or more speakers are needed, StageSource products use a proprietary digital networking protocol called L6 LINK? to simplify setup. Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimization. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best.

 

Orientation and Pole-mount Sensors

StageSource L3m uses an internal accelerometer, optical sensors and DSP to accelerate setup and optimize the sound of your system. Based on the information the system detects, it selects the right Smart Speaker mode for the application, and automatically adjusts its performance.

For example, when the unit is powered on in a horizontal position, it automatically selects Floor Monitor mode. This mode provides a slight reduction in low-frequency content to counteract coupling when placing the speaker on the floor.

If any "backline" mode is chosen (Keyboard, Acoustic Guitar, Electric Guitar), the L3m then checks its orientation (via the accelerometer) and looks to see if it is on a pole (via the pole sensor). If the speaker is vertical and not on a pole, the L3m activates Virtual Tilt-back which optimizes the speaker tuning to achieve an upward tilt to its main axis. This helps to aim the sound upward towards the performer's ears when the speaker is placed on the ground. If the speaker is on a pole, it doesn't activate Virtual Tilt-back because it assumes that the speaker is elevated and aimed in the desired direction.

 

Integrated Feedback Suppression

Since feedback can ruin a performance, StageSource L3m uses intelligent 12-band feedback suppression to identify the problem frequencies and adjust levels without affecting the overall sound.

L3m feedback suppression continuously analyzes the audio signal, identifying frequencies that have the characteristics of feedback (steady frequencies with few overtones, rising in amplitude) and then applies a narrow notch filter to remove the offending frequency. L3m feedback suppression can remove up to 12 independent feedback frequencies. You can set the feedback analyzer to one of three modes, depending on how aggressively the analyzer will seek out potential feedback frequencies.

 

Multi-function Design and Scalability

Multi-function design combined with powerful Smart Speaker modes and digital networking provides true scalability whether you're using a single L3m as a standalone PA or multiple StageSource loudspeakers as main PA, monitors and backline. Add StageSource L3s subwoofers and customize a configuration to meet your live sound or installation needs.

 

Road-ready Construction

StageSource L3m is ready for whatever the road can throw at it. The robust enclosure is constructed of dual-braced, heavy-duty plywood, and the tour-grade steel grille features protective screen backing that shields the drivers from impact damage.

If you need to fly the speakers, each StageSource L3m features four professional M10 suspension points with a pull-back.

Taille du speaker Autres
Type de matériel Façade & Retour

30 other products in the same category:

Yamaha,DSR112

Yamaha,DSR112

990,00 €

Yamaha,DSR115

Yamaha,DSR115

1 080,00 €

Yamaha,DSR215

Yamaha,DSR215

1 520,00 €

RCF,ART 745-A Mk IV

RCF,ART 745-A Mk IV

1 290,00 €

RCF,4PRO 1031

RCF,4PRO 1031

850,00 €

RCF,4PRO 2031

RCF,4PRO 2031

865,00 €

RCF,4PRO 3031

RCF,4PRO 3031

890,00 €

RCF,4PRO 5031

RCF,4PRO 5031

1 280,00 €

Alto,Trouper

Alto,Trouper

230,00 €

Presonus, Air10

Presonus, Air10

445,00 €

Presonus,  Air15

Presonus, Air15

600,00 €

Presonus,  Air12

Presonus, Air12

500,00 €

Presonus,  ULT12

Presonus, ULT12

990,00 €

Presonus,  ULT15

Presonus, ULT15

1 080,00 €

RCF,HD 10-A MK4

RCF,HD 10-A MK4

495,00 €

RCF,HD 32-A MK4

RCF,HD 32-A MK4

860,00 €

Mackie,SRM550

Mackie,SRM550

490,00 €

Mackie,SRM650

Mackie,SRM650

555,00 €

QSC,K10.2

QSC,K10.2

750,00 €

Prix Public: 1 195,00 €
Vous économisez: 35,00 € (2.93 %)