The sE Gemini II is the larger-than-life answer to your vocal tracking needs.
It's not just large in stature - it's HUGE in sound.
The Gemini II dual valve microphone is a no-holds-barred piece of microphone history. The dual valve design means pure valve warmth from the 12AX7 input valve, coupled with a 12AU7 valve on the output stage. The result is an incredibly large, detailed, and intimate sound – reminiscent of the classic valve microphones from decades ago, but with a thoroughly modern twist.
DUAL-TUBE DESIGN
Most microphones use a transformer to optimize the mic's output impedance and couple the mic to the mic preamplifier. With the Gemini II, this optimization is accomplished with a second vacuum tube, negating any high-frequency rolloff typically incurred with a transformer.
This provides the Gemini II with a sparkling, pristine high-end typically only found in the most expensive solid-state microphones, while maintaining the rich, thick tonality of a tube mic. Not just for vocals, the bass cut filter and -10dB pad make the Gemini useful for loud and heavy sources like drum room mics and booming timpani.
Capsule Type | Hand-Crafted True Condenser |
Diaphragm | 35mm Gold/Mylar |
Directional Pattern | Cardioid |
Frequency range | 20 Hz - 20 kHz |
Impedance | 200 Ohms |
Sensitivity | 35.48 mV/Pa (-29 dB) |
Max SPL | 135/145 dB (0/-10 dB pad) (0.5% THD @ 1kHz) |
Signal to Noise Ratio | 75 dB |
Self Noise | 19 dB(A) |
Pass Filter Switch | 150 Hz |
Preattenuation Pad | -10 dB |
Power Requirement | Dedicated PSU (included) |
Power Requirement | Dedicated PSU (included) |
Weight (mic) | 1224g / 43.18oz |
Weight (PSU) | 1691g / 59.65oz |
Tube complement | 1x 12AX7/ECC83, 1x 12AU7/ECC82 |
Connector | XLR3F from PSU |